Safetyman Pipe Markers Identification System
Pipe Markers are a quick way to identify contents in a pipe, especially in emergency situations
In an emergency, it’s essential to know the contents of all pipes, particularly so for fire service personnel.
Safetyman is the originator of self adhesive pipe markers in Australia and, all our pipe markers are Australian Standards 1345-1995 compliant.
Beware of sub-standard copies that do not comply. This could leave you vulnerable in a mandatory situation.
Click Here for our Full Range of Pipe Markers
Please Call Us on 1300 781 288
OR
Complete our Inquiry Form
There are many benefits to having critical pipe markers in your facility. Not only do they help you to identify the contents of each pipe, but they also help to improve the safety of your employees. Pipe markers are required by Australian Standards AS1345-1995 and AS1417.1-2002.
Benefits of Australian Standard 1345-1995 Compliant Pipe Markers
There are many benefits to using Australian Standard 1345-1995 compliant pipe markers. For one, they help to ensure that your pipes are properly labeled and identified. This can help to prevent accidents and misunderstandings about what is inside a particular pipe.
Additionally, these markers can help you to quickly and easily locate a specific pipe if you need to perform maintenance or repairs. Additionally, compliant pipe markers can help to increase the overall safety of your workplace by clearly identifying potential hazards.
Finally, using compliant pipe markers can help to improve the overall efficiency of your operations by allowing you to quickly and easily identify the contents of each pipe.
Understanding the Requirements of Australian Standard 1345-1995
If you’re not familiar with Australian Standard 1345-1995, it’s the standard that sets out the requirements for the manufacture, supply and installation of fire sprinkler systems in Australia.
There are three main parts to the standard:
– Part 1: General requirements
– Part 2: Installation requirements
– Part 3: Maintenance requirements
In this blog, I’ll be focusing on Part 2: Installation requirements.
The requirements in Part 2 are divided into two sections:
– Section 1: System design
– Section 2: Installation
In order to comply with the standard, you need to make sure that your sprinkler system is designed and installed in accordance with these sections.
Section 1 sets out the requirements for the system design, including the type of sprinkler system, the water supply, the pipework and the control system.
Section 2 sets out the requirements for the installation of the system, including the placement of the sprinklers, the testing and commissioning of the system, and the ongoing maintenance.
To summarise, the requirements of Australian Standard 1345-1995 are:
– The sprinkler system must be designed and installed in accordance with Sections 1 and 2 of the standard.
– The system must be tested and commissioned before it is put into use.
– The system must be maintained in accordance with the manufacturer’s instructions.
Why Safetyman Pipe Markers are AS1345-1995 Compliant
Pipe markers are an important part of any piping system. They help identify the contents of the pipe, the direction of flow, and any potential hazards. They also help maintain the flow of product in the event of a pipe break or leak.
Safetyman Pipe Markers are AS1345-1995 compliant, which means they meet the Australian Standard for Chemical Resistance of Thermoplastics. This standard ensures that our pipe markers will withstand harsh chemicals and temperature extremes.
Click Here for our Full Range of Pipe Markers
Ensuring Adherence to AS1345-1995 Requirements
In order to ensure adherence to the requirements of AS1345-1995, it is important to take a few simple steps. First, make sure that all employees who will be working with pipemarkers are properly trained in the use of these devices. Next, familiarize yourself with the requirements of the standard and make sure that your workplace is compliant. Finally, regularl monitor your workplace for compliance and take corrective action if necessary.
Pipemarkers are an important part of any workplace that deals with piping or other similar systems. These devices are used to mark the various components of a piping system so that they can be easily identified. While they are not required by law, many workplaces choose to use them in order to improve safety and efficiency.
AS1345-1995 is the Australian Standard for the Use of Pipemarkers. This standard sets out the minimum requirements for the use of pipemarkers in workplaces. It covers everything from the type of material that should be used for the markers to the size and placement of the markers.
Making sure that your workplace is compliant with AS1345-1995 is important for several reasons. First, it helps to ensure the safety of your employees. Second, it helps to improve the efficiency of your workplace. Finally, it shows that you are committed to complying with all relevant standards and regulations.
There are a few simple steps that you can take to ensure that your workplace is compliant with AS1345-1995. First, make sure that all employees who will be working with pipemarkers are properly trained in the use of these devices. Next, familiarize yourself with the requirements of the standard and make sure that your workplace is compliant. Finally, regular monitor your workplace for compliance and take corrective action if necessary.
By taking these simple steps, you can help to ensure that your workplace is safe, efficient, and compliant with all relevant standards and regulations.
Innovative Self-Adhesive Pipe Markers from Safetyman
If you’re looking for a quick and easy way to label your pipes, then you need to check out Safetyman’s innovative self-adhesive pipe markers! These markers meet Australian Standards 1345-1995 and are perfect for both indoor and outdoor use. They’re also weather resistant, so you don’t have to worry about them fading or peeling over time.
Safetyman’s pipe markers are available in a variety of sizes and colors, so you can find the perfect ones to meet your needs. They’re also easy to apply – just peel and stick! Whether you’re looking to label your home plumbing or you need to mark pipes in a commercial or industrial setting, Safetyman has the perfect solution for you.
So why wait? Order your self-adhesive pipe markers today and make pipe labeling quick and easy!
Please Call Us on 1300 781 288.
Ensuring Quality and Durability with Safetyman Pipe Markers
As a business owner, you want to make sure that your customers are getting the best possible product. This means ensuring that your products are durable and of high quality. One way to do this is by using Safetyman Pipe Markers.
Safetyman Pipe Markers are made to Australian Standards 1345-1995, which means that they are of the highest quality and will last a long time. They are also safe to use, which is important for both you and your customers.
Using Safetyman Pipe Markers is a great way to ensure that your products are of the best quality and will last a long time. This will give you peace of mind and your customers will be happy knowing that they are getting a product that is safe to use and will last them a long time.
Guidelines for Applying AS1345-1995 Compliant Pipe Markers
If you’re looking to add some AS1345-1995 compliant pipe markers to your pipes, there are a few guidelines you’ll need to follow. Here are a few tips to help you get started:
1. Figure out what size markers you need. The size of the marker should be relative to the size of the pipe. For example, a small pipe would need a small marker.
2. Choose the right material. Pipe markers are typically made from vinyl or metal. Each material has its own benefits and drawbacks, so choose the one that best suits your needs.
3. Make sure the marker is properly placed. The marker should be placed on the top of the pipe, on the side that is most visible. The bottom of the marker should be at least 150mm from the ground.
4. Use the proper installation method. Depending on the material you choose, you’ll need to use a different installation method. For example, metal markers need to be bolted onto the pipe, while vinyl markers can simply be glued on.
5. Choose the right color. The color of the marker should be based on the contents of the pipe. For example, a pipe carrying hazardous materials would need a different color marker than a pipe carrying potable water.
By following these guidelines, you can be sure that your AS1345-1995 compliant pipe markers will be installed correctly.
Choosing the Right Pipe Markers to Achieve Compliance
Most businesses in Australia need to comply with Australian Standard 1345-1995, which is why it’s important to choose the right pipe markers. There are a few things to consider when choosing pipe markers, such as the type of marker, the size, the colour and the material.
Type of marker: There are two main types of pipe markers – directional and identification. Directional markers are used to indicate the direction of flow, while identification markers are used to identify the contents of the pipe.
Size: The size of the pipe marker should be appropriate for the size of the pipe. For example, a small marker should be used for a small pipe and a large marker should be used for a large pipe.
Colour: The colour of the pipe marker should be chosen so that it is visible and legible. For example, a bright colour should be used for a pipe that is exposed to sunlight, and a dark colour should be used for a pipe that is not exposed to sunlight.
Material: The material of the pipe marker should be chosen so that it is durable and will not fade over time. For example, a UV-resistant marker should be used for a pipe that is exposed to sunlight.
DIY Solutions for AS1345-1995 Compliant Pipe Markers
Are you looking for a way to label your pipes in compliance with Australian Standard 1345-1995? If so, there are a few different options available to you.
One popular option is to use DIY pipe markers. These can be made from a variety of materials, including vinyl, PVC, or metal. There are a few things to keep in mind when creating your own pipe markers, such as making sure the markers are the correct size, using the correct symbols, and including the necessary information.
Another option is to purchase pre-made pipe markers that comply with AS1345-1995. These can be found online or at some hardware stores. Be sure to check the specs of the markers before you purchase them to ensure they will meet your needs.
Whichever route you choose, following the guidelines set forth in Australian Standard 1345-1995 will help to ensure the safety of your workplace.
The Benefits of Investing In AS1345-1995 Compliant Pipe Markers from Safetyman
There are many benefits of investing in AS1345-1995 compliant pipe markers from Safetyman. Here are just a few:
1. AS1345-1995 compliant pipe markers are highly visible, which can help to prevent accidents and injuries.
2. AS1345-1995 compliant pipe markers are durable and long-lasting, so you won’t have to replace them as often.
3. AS1345-1995 compliant pipe markers are easy to install, so you can save time and money on installation costs.
4. AS1345-1995 compliant pipe markers are available in a variety of materials, so you can choose the best option for your needs.
5. AS1345-1995 compliant pipe markers are backed by a warranty, so you can be confident in your investment.
When it comes to safety, there is no substitute for quality. That’s why you should invest in AS1345-1995 compliant pipe markers from Safetyman. We offer the highest quality pipe markers available, and our products are backed by a warranty. So you can be confident that you’re making a wise investment when you choose Safetyman.
Pipe markers are an important part of any safety program, and choosing the right ones can be a challenge. There are many different types and styles of pipe markers available, and it can be difficult to know which ones are right for your facility. But when you choose pipe markers that are compliant with Australian Standard 1345-1995, you can be confident that you’re getting the highest quality products available.
Safetyman is a leading provider of AS1345-1995 compliant pipe markers. Our products are made from the highest quality materials and are backed by a warranty, so you can be confident that you’re making a wise investment when you choose Safetyman.
AS1345-1995 compliant pipe markers are available in a variety of colors and styles, so you can choose the ones that best meet your needs. Whether you’re looking for simple black and white markers or something more elaborate, we have what you’re looking for. And because our products are backed by a warranty, you can be confident that you’re getting the highest quality products available.
So if you’re looking for the highest quality pipe markers available, choose Safetyman. Our AS1345-1995 compliant products are the perfect solution for your safety needs.
Please Call Us on 1300 781 288.
AS 1345-1995 standard
AS 1345-1995 standard for pipe identification was designed to provide plant personnel with a cohesive system for identifying the contents on pipes, conduits and ducts ultimately reducing chances of errors, simplifying the handling of emergencies and minimizing hazards.
The AS 1345-1995 standard provides direction for labeling materials contained in piping systems, including electrical conduits, by means of background colour marking, legend and symbols.
AS 1345-1995 establishes which piping, conduit and ducts should be labeled, where labels should be applied and label legend ontent.
In addition, this standard regulates the letter size, marker length, marker colour, and location of markers to be installed.
Pipe markers indicate both the pipe contents and direction of flow. The contents are indicated by text, pictogram(s) and by a standard colour scheme and must contain the following information:
• A word or words indicating the contents of the pipe and, if desired, some especially hazardous aspect of the pipe, e.g. high pressure, high voltage, toxic waste; or both. The words must be in either white or black letters.
• A contrasting border around the colour identification block. The border colour should be white, but may be yellow if a hazard identification patch or band is to be used with the marker.
• A chevron within the border to indicate the direction of flow in a pipe carrying a liquid or gas. One arrow should be removed if flow direction is only one way.
• The background colour and legend colour must be made of clearly legible letters and/or numbers, providing the name or identifier of the material. Colours are used to identify the contents or the hazardous nature of the contents.
Click Here for our Full Range of Pipe Markers